Re: New disks in 7026

From: Maguire, James (James.Maguire@OGS.STATE.NY.US)
Date: Tue Dec 30 2003 - 09:55:52 EST


John,
I have never dealt with this machine before, (only worked with F50's), but
these go into a 2104 drive module. They don't show up at all. There were 8
disks in it already, and these are the 9th and 10th.
Thanks
Jim

-----Original Message-----
From: John Jolet [mailto:john.jolet@FXFN.COM]
Sent: Tuesday, December 30, 2003 9:42 AM
To: aix-l@Princeton.EDU
Subject: Re: New disks in 7026

You don't say whether they were hotpluggable disks or not, so we'll assume
they were. after you inserted the drives, did you get power back to the
drive slots? You might check and see if they show up, but as defined, not
available.
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Maguire, James
Sent: Tuesday, December 30, 2003 7:38 AM
To: aix-l@Princeton.EDU
Subject: New disks in 7026

Hello list. I just received two 73gb drives for a 7026-B80. I put them in
place yesterday, and thought they would become available by running cfgmgr,
but they do not appear. So, I scheduled a reboot last night hoping that
would take care of it, but still no luck. In looking at the Installation
instructions it appears that it might need a power off/ power on. Is there
any way around that?

Thanks,
Jim



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:26 EDT