From: Rick YEH (rick@BULL.COM.TW)
Date: Tue Dec 09 2003 - 22:51:15 EST
Yes, I had install the ML level from ML9 to ML11 yesterday but failed. and I
had reboot the server several times but the problem still occurs. However, I
will try to install the ML level again. Thanks!
Rick
----- Original Message -----
From: "Support" <support@XIATECS.NET>
Newsgroups: bit.listserv.aix-l
To: <aix-l@Princeton.EDU>
Sent: Wednesday, December 10, 2003 11:07 AM
Subject: Re: vmstat and sar problem
> This usually means that the commands are not at the same level as the
> kernel. Did you install a ML level or some fixes that require a reboot?
> Try to reboot the server and see if the problem still occurs.
>
> Sukhjeet Singh
>
> -----Original Message-----
> From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
> Rick YEH
> Sent: Tuesday, December 09, 2003 9:51 PM
> To: aix-l@Princeton.EDU
> Subject: vmstat and sar problem
>
> Hello AIXer,
> We have a system running AIX4.3.3 ML9 and when I type "vmstat" and
> "sar"
> command, the system show me as follows,
>
> # vmstat
> vmstat: 0551-129 knlist failed.#
>
> # sar 2 4
> sadc: 0551-109 Warning: The kernel data structures are not consistent.
> sadc: 0551-109 Warning: The kernel data structures are not consistent.
>
> AIX mail 3 4 000B9A5D4C00 12/10/03
>
> 10:45:19 %usr %sys %wio %idle
> sar: 0551-211 Specify a positive integer for the time change.
> sar: 0551-211 Specify a positive integer for the time change.
> sar: 0551-211 Specify a positive integer for the time change.
> sar: 0551-211 Specify a positive integer for the time change.
>
> Can someone tell me what happen with the system? Thanks!
>
> Rick
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:23 EDT