From: Jeff Barratt (jbarratt@COMPSAT.COM)
Date: Wed Oct 01 2003 - 12:49:04 EDT
either application export/import, NFS, or maybe rsync over rsh might be an
option..
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
John Jolet
Sent: Wednesday, October 01, 2003 12:32 PM
To: aix-l@Princeton.EDU
Subject: Re: Moving AIX 4.3.3 data to Linux OS
i've done some experimentation with this using a fastt500 as the storage
medium and been completely unsuccessful mounting a drive or snap of a drive
created on one type of host on the other. so you'd have to do it the hard
ware. export move import
-----Original Message-----
From: Patrick B. O'Brien [mailto:pobrien@DOIT.NV.GOV]
Sent: Wednesday, October 01, 2003 10:55 AM
To: aix-l@Princeton.EDU
Subject: Re: Moving AIX 4.3.3 data to Linux OS
Create a file and give it a try. The flat file will come over with a set of
permissions in which you should be able to manipulate on the RH side no
problem.
-----Original Message-----
From: Sue Pellerito [mailto:Sue.Pellerito@JACKINTHEBOX.COM]
Sent: Tuesday, September 30, 2003 4:07 PM
To: aix-l@Princeton.EDU
Subject: Moving AIX 4.3.3 data to Linux OS
Has anyone ported AIX filesystem data over to a Linux OS (Redhat?) The data
is stored on an EMC Symmetrix. The EMC will be connected to the Linux
hardware as well. Any suggestions? I have approx 280GB of Lotus Notes data
to move.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:15 EDT