From: Holger.VanKoll@SWISSCOM.COM
Date: Fri Sep 26 2003 - 08:55:30 EDT
thats the most reliable way.
if I had to do this on a few servers, that would be fine.
but I have to do it on a few tens, and it would help a lot if there
would be any command.
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: Friday, September 26, 2003 2:47 PM
To: aix-l@Princeton.EDU
Subject: Re: pci slots
I would say the best way is to look at the doc for the server.
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+---------------------------->
| | Holger.VanKoll@SW|
| | ISSCOM.COM |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 09/26/2003 03:05 |
| | AM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>-----------------------------------------------------------------------
--------------------------------------------------------|
|
|
| To: aix-l@Princeton.EDU
|
| cc:
|
| Subject: pci slots
|
>-----------------------------------------------------------------------
--------------------------------------------------------|
Hello,
how can I check if a slot is 32 or 64bit?
I know lsslot, but that checks only hot-pluggable slots.
Regards,
Holger
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:14 EDT