From: Coyle, Jack (Jack.Coyle@REXHEALTH.COM)
Date: Sat Sep 20 2003 - 13:59:05 EDT
Per the Service Guide, you should be able to use:
diag (from command line)
-> select Task Selection
-> select SSA Service Aids
-> select Enclosure Environment
-> select drawer of interest
-> read off "Ambient Temperature"
Incidentally, under SSA Service Aids, there is also an "Enclosure Settings"
options that allows you to manipulate the thresholds. Hope this is of some
value.
Regards,
Jack Coyle
Rex Healthcare
(919) 784-3792
jack.coyle@rexhealth.com
> ----------
> From: L[SMTP:leed@CHELE.CAIS.NET]
> Reply To: IBM AIX Discussion List
> Sent: Saturday, September 20, 2003 1:03 PM
> To: aix-l@Princeton.EDU
> Subject: [Q] 7133-D40 temperature too high ???
>
> Due to the Huricane Computer center lost power for 36 hours. Their is NO
> air condition inside Computer room. I got error message on the log said
> 7133-D40 "temperature unacceptabel". Does anyone knwo how to check
> temperature inside the 7133-D40 SSA disk array?
>
> Thanks.
>
> Mreeage:
>
> LABEL: SSA_ENCL_ERR2
> IDENTIFIER: A5BED0BC
>
> Date/Time: Fri Sep 19 12:21:01
> Sequence Number: 1074
> Machine Id: 000E40CH2A10
> Node Id: PROD
> Class: H
> Type: PERM
> Resource Name: enclosure0
> Resource Class: container
> Resource Type: ses
> Location: 00-00-2AB2
> VPD:
> Part Number.................9L1850
> Serial Number...............292C2AB2
> EC Level....................000000R000
> Manufacturer................IBM053
> ROS Level and ID............0020
> Device Specific.(Z0)........DISPLAY=2AB2
> Device Specific.(Z1)........BYPASS1_16= 09L5580
> Device Specific.(Z2)........BYPASS4_5= 09L5580
> Device Specific.(Z3)........BYPASS8_9= 09L5580
> Device Specific.(Z4)........BYPASS12_13= 09L5580
> Device Specific.(Z5)........FAN1=09L2794
> Device Specific.(Z6)........FAN2=09L2794
> Device Specific.(Z7)........FAN3=09L2794
> Device Specific.(Z8)........PSU1=09L4299
> Device Specific.(Z9)........PSU2=09L4299
> Device Specific.(ZA)........CTRL= 27H0708
> Device Specific.(ZB)........OPERATOR= 08L7924
>
> Description
> TEMPERATURE UNACCEPTABLE
>
> Probable Causes
> THERMAL DETECTOR
>
> Failure Causes
> THERMAL DETECTOR
>
> Recommended Actions
> PERFORM PROBLEM DETERMINATION PROCEDURES
>
> Detail Data
> SENSE DATA
> 0802 5200 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:13 EDT