From: Black, Brian (BBlack@CCBCMD.EDU)
Date: Fri Sep 12 2003 - 10:09:55 EDT
# oslevel -r
Usage: oslevel [ -l <level> | -g | -q ]
-l : List filesets at levels earlier than maintenance level
specified by the <level> parameter
-g : List filesets at levels later than most recent
complete maintenance level
-q : List names of known maintenance levels which may be
specified with the -l flag
Output indicates that base system software is entirely at
or above a particular maintenance level. Corresponding output
would be 4.1.1.0 first AIX 4.1 maintenance level.
The additional options may be specified to determine which
filesets differ from the maintenance level.
#
Brian H. Black , Systems Engineer
Community College Of Baltimore County
V-Mail 410-455-4908
E-Mail bblack@ccbcmd.edu
http://www.ccbcmd.edu
"Don't Look where you fell, look where you slipped"
> -----Original Message-----
> From: John Jolet [mailto:john.jolet@FXFN.COM]
> Sent: Friday, September 12, 2003 10:00 AM
> To: aix-l@Princeton.EDU
> Subject: Re: AIX maint level
>
>
> what does oslevel -r show?
>
> -----Original Message-----
> From: Black, Brian [mailto:BBlack@CCBCMD.EDU]
> Sent: Friday, September 12, 2003 7:49 AM
> To: aix-l@Princeton.EDU
> Subject: AIX maint level
>
>
> I have an ESS upgrade to perform and IBM wants me to apply
> AIX patches if my
> OS is below 4.3.3.0.09.
> How can I find out what maint level an Aix system is at? Oslevel just
> returns 4.3.3.0...
>
> Brian H. Black , Systems Engineer
> Community College Of Baltimore County
> V-Mail 410-455-4908
> E-Mail bblack@ccbcmd.edu
> http://www.ccbcmd.edu
> "Don't Look where you fell, look where you slipped"
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:12 EDT