From: Holger.VanKoll@SWISSCOM.COM
Date: Wed Sep 10 2003 - 03:16:04 EDT
you can use map-files with mklvcopy, too
or remove the mirror before extending and use the physical volumes as a
parameter when using mklvcopy again
as a third possibility you could use chpv -a n to prevent some pv to be
used for placement of mirrors
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Tuesday, September 09, 2003 9:53 PM
To: aix-l@Princeton.EDU
Subject: Mirroring question
Scenario: You have a created a logical volume. After the
creating the lv on one physical volume you then mirror that physical
volume to another physical volume. Say 2 months down the road you have
extended that logical volume to the point where it spills onto another
physical volume therefore extending your mirror over another pv as well.
Question: How can you control which pv the mirror is extended
to? Is this even possible?
Thanks in advance for any insight on this process.
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:11 EDT