From: Patrick B. O'Brien (pobrien@DOIT.NV.GOV)
Date: Tue Sep 09 2003 - 16:59:02 EDT
This might help. If you have a spare pv you may be able to manipulate lv's by doing a mklvcopy lvname 3 pvname.
You can mirror up to 3 lv's so use that feature to control where the lv lives.
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Tuesday, September 09, 2003 12:53 PM
To: aix-l@Princeton.EDU
Subject: Mirroring question
Scenario: You have a created a logical volume. After the creating the lv on one physical volume you then mirror that physical volume to another physical volume. Say 2 months down the road you have extended that logical volume to the point where it spills onto another physical volume therefore extending your mirror over another pv as well.
Question: How can you control which pv the mirror is extended to? Is this even possible?
Thanks in advance for any insight on this process.
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:11 EDT