From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Fri Sep 05 2003 - 14:48:11 EDT
I think a previous post said you have to unmount and mount a filesystem to
reset that check. Not sure if that applies to jfs2.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX Certified Advanced Technical Expert
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: Friday, September 05, 2003 11:24 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] JFS2 Full does not get logged in errpt
Hi *
I just discovered something. Can someone confirm the same ?
We've had several filesystems fill up due to SAP core dumps in the past few
days. I have a job that monitors the error log for changes and it did not
get these conditions. I was concerned there was a problem in my script.
In fact, it is working fine. The filesystems are JFS2.
I looked at /var/adm/errtmplt, and there is a JFS_FS_FULL entry, but no
JFS2_FS_FULL.
Can someone test/confirm this ? I ran a "dd" to fill up /home, and indeed
there was no error logged.
Thanks, Bill.
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:10 EDT