From: Holger.VanKoll@SWISSCOM.COM
Date: Tue Aug 19 2003 - 08:23:01 EDT
I am not sure what you want to know / to do.
Each adapter can have its own rspool/spoolsizes, no problem. The
question is what values make sense. For some software, f.e. vsd, there
are recommendations.
If you have performance problems, its probably more wise to look at
tcp-parameters ( no command ).
-----Original Message-----
From: Muthyam Reddy [mailto:MREDDY@JOY.COM]
Sent: Monday, August 18, 2003 7:29 PM
To: aix-l@Princeton.EDU
Subject: SP switch tuning
** High Priority **
Hi friends,
We have SP Switch (check MX type) connected 18 nodes including two S80s.
At present we have diffrent{ spoolsize,rpoolsize) among two S80s in
which one is production having 5mb and other is quality also running
TSM server have 16mb.And rest of the 16 nodes have 4mg size. I am
planning to change (spoolsize,rpoolsize} size parameters from 5mb to
16mb in production to make equal to TSM server which is in quality. My
question is... Do I need to change in all sp nodes to make this work?
OR
the spoolsize and rpoolsize values MUST be the same on all nodes using
the switch.
please advice me .
thanks and regards
/mani
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++
This electronic mail transmission contains information from Joy Mining
Machinery which is confidential, and is intended only for the use of the
proper addressee. If you are not the intended recipient, please notify
us immediately at the return address on this transmission, or by
telephone at (724) 779-4500, and delete this message and any attachments
from your system. Unauthorized use, copying, disclosing, distributing,
or taking any action in reliance on the contents of this transmission is
strictly prohibited and may be unlawful.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++
<<privacy>>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:08 EDT