From: John Jolet (john.jolet@FXFN.COM)
Date: Thu Jul 31 2003 - 18:13:52 EDT
make sure the switch the rs/6000 is plugged into supports binding...not all do.
-----Original Message-----
From: Librado Pamintuan [mailto:LPAMINTU@REGINA.CA]
Sent: Thursday, July 31, 2003 3:00 PM
To: aix-l@Princeton.EDU
Subject: Ethernet Binding
Hello All,
We are going to setup a dedicated backup server using an
IBM pSeries 615-6C3 2-way 1.2 Ghz Power4 processors.
Hoping that our backup throughput will increase, we are planning to use 2 Ethernet cards with just one I.P. address.
Our backup device/equipment is a StorageTek 9714 Timberwolf library with 6 DLT 7000 tape drives connected to the servers via SCSI adapters.
Is there any precautions or do's and dont's before I proceed with this plan?
thanks in advance,
Librado Pamintuan
Technical Support Analyst II
Information Systems Dep.
Operations Group
City of Regina
Phone: (306) 777-7573
General Fax: (306) 777-6804
eFax: (306) 546-6002
eMail: lpamintu@regina.ca
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:06 EDT