From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Tue Jul 29 2003 - 11:37:07 EDT
I think what you need is something like:
rsh wherever dd if=/dev/rmt0 | restore -x -f -
Take a look at it; have a play. I've not actually done this myself.
Simon Green
Altria ITSC Europe Ltd
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
> -----Original Message-----
> From: Tim Muller [mailto:aix_sa_706@YAHOO.COM]
> Sent: 29 July 2003 16:25
> To: aix-l@Princeton.EDU
> Subject: Re: Mounting tape drives between systems
>
>
> Actually, I want to do a restore from a remote tape
> drive. From what you've written, I think that I need
> to execute a remote shell from the target system, then
> I can execute the restore command to restore from the
> remote tape to the current directory. Correct? TIA.
>
>
> --- "Green, Simon" <Simon.Green@EU.ALTRIA.COM> wrote:
> > One way is to use dd on one system to write the data
> > to stdout, pipe it via
> > rsh to dd on the remote system and thence to the
> > tape.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:04 EDT