From: Selvarajan T (Selvarajan.T@ALFUTTAIM.CO.AE)
Date: Wed Jul 23 2003 - 11:07:46 EDT
Check the model using uname -m
Which results xxyyyyyymmss
The meanings of the placeholders are as follows:
xx = 00
yyyyyy = Unique CPU ID
mm = Model ID <- these are the numbers to use to determine CPU speed,
substitute these in the table below
ss = 00 (Submodel)
Model ID Machine Type Processor Speed
Architecture
70 9076-SP2 Wide 66
Power2
72 9076-SP2 Wide 66
Power2
79 9076-SP2 Wide 77
Power2
89 9076-SP2 Wide 135
P2SC
If you have problem with the table, please look into:
http://post.doit.wisc.edu/aix/tips/determine_cpu_speed.htm
<http://post.doit.wisc.edu/aix/tips/determine_cpu_speed.htm>
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Wednesday, July 23, 2003 6:50 PM
To: aix-l@Princeton.EDU
Subject: Re: cpu speed of Winterhawk node
Forgive me....but what is a winterhawk?
Mathew Gipson
matt.gipson@americredit.com <mailto:matt.gipson@americredit.com>
817.525.7123
-----Original Message-----
From: Miller, Dave (I.S.) [mailto:Dave.Miller@BHS.ORG]
Sent: Wednesday, July 23, 2003 9:37 AM
To: aix-l@Princeton.EDU
Subject: cpu speed of Winterhawk node
Does anyone know a command I can use to determine the CPU speed of a
winterhawk node (i.e. 375mhz or 450mhz)?
thanks
CONFIDENTIALITY NOTICE: This Email communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients named above. If you are not the intended recipient,
you are hereby notified that you have received this communication in error
and that any review, disclosure, dissemination, distribution or copying of
it or its contents is prohibited. If you have received this communication in
error, please reply to the sender immediately or by telephone at (413)
794-0000 and destroy all copies of this communication and any attachments.
For further information regarding Baystate Health System's privacy policy,
please visit our Internet web site at http://www.baystatehealth.com
<http://www.baystatehealth.com> .
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:03 EDT