From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Wed Jul 16 2003 - 20:27:31 EDT
Ok, I have dog too on 4.3.3.
Kevin
-----Original Message-----
From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
Sent: Wednesday, July 16, 2003 5:14 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] console
I have dog and gil running too on 5.1. I am familiar with gil on 4.3.3, but
dog is a new on to me. Can't speak for j2pg (Java)?
Kevin
-----Original Message-----
From: N. Leenders [mailto:nadine@UALBERTA.CA]
Sent: Wednesday, July 16, 2003 5:03 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] console
I'm moving into trying it. We can't just set TERM because the console
server isn't displaying anything. An IBM fellow happened to be here, so I
asked him and he suggested the smitty tty like you.
Smitty tty, setting vt 100 didn't work. We are trying to change the flow
control now, but have been distracted because there are some processes
running that don't look good. I'm wondering, are j2pg, dog, and gil
processes that should be running under root under aix 5.2, or is there a
chance the machine has been broken into?
Nadine Leenders
Research Support
University of Alberta
On Wed, 16 Jul 2003, Adams Kevin J wrote:
> Is it just as simple as setting TERM=vt100 or smitty tty and set to vt100?
>
> Have you tried it of just in planning stages?
>
> I have used reflections terminal emulator as vt100 just fine.
>
> Kevin Adams
> PacifiCare Behavioral Health
> Principal Systems Analyst
> AIX Certified Advanced Technical Expert
>
>
> -----Original Message-----
> From: N. Leenders [mailto:nadine@UALBERTA.CA]
> Sent: Wednesday, July 16, 2003 12:36 PM
> To: aix-l@Princeton.EDU
> Subject: [aix-l] console
>
>
> We have a console server I'd like to configure an IBM 630 running AIX 5.2
> to use. The console server basically emulates a dumb vt100 like terminal.
> It looks to me like the IBM 630 is set up to only use an IBM 3151 type
> console.
>
> In the User's Guide for the 630, Appendix C lists "general attributes
> required when using a tty terminal" and says "The following general
> attributes are the default settings for the diagnostic programs. Be sure
> your terminal is set to these attributes." Then it lists settings for
> 3151, 3161, and 3164 consoles. Does this preclude using a vt100 type
> terminal for a console?
>
> However, in the man page for chcons, there is an example for:
> chcons /dev/lft0
> except that I don't have a /dev/lft0 listed in /dev.
>
> Can anyone shed some further light on this for me?
>
> Thanks, Nadine
>
>
> This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
>
> If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
>
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:02 EDT