From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Wed Jul 16 2003 - 08:38:38 EDT
According to the PCI adapter reference, the 6228 is not listed as
supported. Might be a microcode issue ?
BV
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+---------------------------->
| | "Green, Simon" |
| | <Simon.Green@EU.A|
| | LTRIA.COM> |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 07/16/2003 05:57 |
| | AM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
| |
| To: aix-l@Princeton.EDU |
| cc: |
| Subject: Re: 6228 with F40 |
>-------------------------------------------------------------------------------------------------------------------------------|
In this context, "64-bit" refers to the PCI bus, not the CPU.
The F40 has two 64-bit slots: 1 and 2. The adapter should work in one of
those, I imagine.
-- Simon Green Altria ITSC Europe Ltd AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2 AIX FAQ at http://www.faqs.org/faqs/aix-faq/ N.B. Unsolicited email from vendors will not be appreciated. > -----Original Message----- > From: Klaus Oberle [mailto:Klaus.Oberle@LINDE-MH.DE] > Sent: 16 July 2003 11:06 > To: aix-l@Princeton.EDU > Subject: 6228 with F40 > > > Hi *, > > is it possible to use an FC adapter (FC 6228) in a 7025 F40 (AIX 5.1)? > AFAIK, the 6228 is a 64-Bit PCI Adapter - will this work anyway?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:02 EDT