From: Steve Latimer (steve@MIDRANGE.CA)
Date: Fri Jun 20 2003 - 14:26:12 EDT
Bob,
I don't know where you would find a chart, but I do know that any of the
new Power 4 boxes require a minimum of 5.1. These are the p610 (actually
Power 3, but requires 5.1), p615, p630, p650, p670 and p690.
If they haven't already purchased the machine they could buy a p620, p640
or p660. These will run 4.3.3.
Steve Latimer
IBM Certified Sales Specialist, pSeries (RS/6000)
Mid-Range Computer Group Inc.
34 Riviera Dr.
Markham, Ont.
L3R 5M1
Phone: (905) 940-1814, ext. #207
Fax: (905) 940-1809
Website: www.midrange.ca
Bob.Kelley@BRINKS
INC.COM To: aix-l@Princeton.EDU
Sent by: IBM AIX cc:
Discussion List Subject: Re: AIX 4.2.1 and pseries ???
<aix-l@Princeton.
EDU>
06/20/2003 02:15
PM
Please respond to
IBM AIX
Discussion List
Thanks guys, I've been hunting a supportability chart and can't seem to
find one. Anybody know where I can find one at ibm.com?
Bobby Kelley
Sr. AIX/UNIX Administrator
|---------+---------------------------->
| | Bill Verzal |
| | <BVerzal@KOMATSUN|
| | A.COM> |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 06/20/2003 01:06 |
| | PM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>
------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: aix-l@Princeton.EDU
|
| cc:
|
| Subject: Re: AIX 4.2.1 and pseries ???
|
>
------------------------------------------------------------------------------------------------------------------------------|
You'll need at least 4.3.3 for the 6xx series and maybe even 5.x
BV
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+---------------------------->
| | Bob.Kelley@BRINKS|
| | INC.COM |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 06/20/2003 12:51 |
| | PM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>
-------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: aix-l@Princeton.EDU
|
| cc:
|
| Subject: AIX 4.2.1 and pseries ???
|
>
-------------------------------------------------------------------------------------------------------------------------------|
I have a special request from development to move from an older RISC box to
a new pSeries 650. The catch is the machine its on is running 4.2.1! Any
body have any experience or thoughts on supportability running 421 on
something like a 6M2 or a 6C1???
Thanks guys!
BTW Bill V. that looks nasty and I wish I could help! I hope you get that
rootvg issue resolution posted on your thread!!
NOTICE TO BRINK'S EMPLOYEES:
All electronic mail communications composed, sent, received or stored on or
through Brink's equipment are subject to the Brink's Electronic
Communications Policy. Employees should have no expectation of privacy in
their use of the Company's electronic mail system.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:56 EDT