From: Steve Latimer (steve@MIDRANGE.CA)
Date: Thu Jun 19 2003 - 08:59:04 EDT
I did a little more research, 375 MHz. Nodes are the SP version of the
7044-270. The 7044 uses the 4110 and 4119 that I mentioned earlier. 4100 1
GB kits do not seem to be supported, they use a 4121 1 GB kit. 4110 and
4119 are both used in H80's, I beleive that they are also used in S80's.
Steve Latimer
IBM Certified Sales Specialist, pSeries (RS/6000)
Mid-Range Computer Group Inc.
34 Riviera Dr.
Markham, Ont.
L3R 5M1
Phone: (905) 940-1814, ext. #207
Fax: (905) 940-1809
Website: www.midrange.ca
"Williamson, Alan"
<alan.williamson@S To: aix-l@Princeton.EDU
IEMENS.COM> cc:
Sent by: IBM AIX Subject: Memory
Discussion List
<aix-l@Princeton.E
DU>
06/19/2003 08:31
AM
Please respond to
IBM AIX Discussion
List
Hi,
I have several SP Nodes and also a mixtures of H80's S80's etc... My SP
nodes need memory, but we nolonger need to use the H80's / S80's. These
machines have loads of memory in them. I know IBM memory is extremely
expensive, we were quoted nearly £5k for 1 Gb, but can I reuse the memory
from the H80's and S80's into our SP nodes? The SP nodes are 375Mhz Power3.
Does anyone know the IBM feature code for the memory that will fit the SP
nodes?
Thanks In Advance,
Alan
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:55 EDT