From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Thu Jun 19 2003 - 08:49:53 EDT
I would venture to say that the 375MHz node is similar to the B80 in
architecture, but I can't say for sure. According to Kingston's website,
the B80/H80/F50 all use the same memory.
BV
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+----------------------------->
| | "Williamson, Alan"|
| | <alan.williamson@S|
| | IEMENS.COM> |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.E|
| | DU> |
| | |
| | |
| | 06/19/2003 07:31 |
| | AM |
| | Please respond to |
| | IBM AIX Discussion|
| | List |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
| |
| To: aix-l@Princeton.EDU |
| cc: |
| Subject: Memory |
>-------------------------------------------------------------------------------------------------------------------------------|
Hi,
I have several SP Nodes and also a mixtures of H80's S80's etc... My SP
nodes need memory, but we nolonger need to use the H80's / S80's. These
machines have loads of memory in them. I know IBM memory is extremely
expensive, we were quoted nearly £5k for 1 Gb, but can I reuse the memory
from the H80's and S80's into our SP nodes? The SP nodes are 375Mhz Power3.
Does anyone know the IBM feature code for the memory that will fit the SP
nodes?
Thanks In Advance,
Alan
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:55 EDT