From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Thu Jun 12 2003 - 13:33:09 EDT
Bill,
Here's a way to narrow this down to an adapter and a number of possible
devices. This usually works, but one time on an M80 it did not work.
Take the bus number value (yours) "1000 00C2" and run:
# odmget -q value=0x100000c2 CuAt
CuAt:
name = "pci2"
attribute = "bus_id"
value = "0x100000c2"
type = "R"
generic = ""
rep = "n"
nls_index = 0
Convert the interrupt level (yours) from hex to decimal: "0000 0034" = 52
and run:
# lsresource -al pci2 |grep -E "bus_intr_lvl.*52"
I scsi1 bus_intr_lvl 52 (A1)
Then get the adapter location code:
# lsdev -C|grep ^scsi1
scsi1 Available 30-68 Wide SCSI I/O Controller
Then get the devices based on the adapter's location code:
# lsdev -C|grep 30-68
scsi1 Available 30-68 Wide SCSI I/O Controller
hdisk0 Available 30-68-00-8,0 16 Bit SCSI Disk Drive
hdisk1 Available 30-68-00-9,0 16 Bit SCSI Disk Drive
hdisk2 Available 30-68-00-10,0 16 Bit SCSI Disk Drive
hdisk3 Available 30-68-00-11,0 16 Bit SCSI Disk Drive
hdisk4 Available 30-68-00-12,0 16 Bit SCSI Disk Drive
hdisk5 Available 30-68-00-13,0 16 Bit SCSI Disk Drive
ses0 Available 30-68-00-15,0 SCSI Enclosure Services Device
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX Certified Advanced Technical Expert
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: Thursday, June 12, 2003 8:09 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] errpt entry
Anyone offer any suggestions on this ?
LABEL: INTRPPC_ERR
IDENTIFIER: DADF69E4
Date/Time: Thu Jun 12 09:52:11
Sequence Number: 9957
Machine Id: 000AF49D4C00
Node Id: sap80i
Class: H
Type: UNKN
Resource Name: SYSINTR
Resource Class: NONE
Resource Type: NONE
Location: NONE
Description
UNDETERMINED ERROR
Probable Causes
SYSTEM I/O BUS
SOFTWARE PROGRAM
ADAPTER
DEVICE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
Detail Data
BUS NUMBER
0000 00C1
INTERRUPT LEVEL
0000 0023
BV
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:55 EDT