From: Gipson, Mat (Mat.Gipson@AMERICREDIT.COM)
Date: Fri May 30 2003 - 12:06:44 EDT
Thanks...it had been awhile since we had to replace any F/W cache batteries
and just forgot the command. That must be the only place it is
documented...myself and another spent some time trying to find it with no
luck.
Thanks,
Mathew Gipson
matt.gipson@americredit.com <mailto:matt.gipson@americredit.com>
817.525.7123
-----Original Message-----
From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
Sent: Friday, May 30, 2003 10:44 AM
To: aix-l@Princeton.EDU
Subject: Re: SSA Cache battery replacement
The command is documented in the Advanced SerialRAID Adapters User's Guide
and Maintenance Information, SA33-3285-01.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX Certified Advanced Technical Expert
-----Original Message-----
From: Darryl Ousterhout [mailto:D.Ousterhout@LABSAFETY.COM]
Sent: Friday, May 30, 2003 6:59 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] SSA Cache battery replacement
Mat,
The batteries typically have about 1000 hours of use left in them after the
first error is generated in the error report. We had a CE come in and
replace all of ours, we had 6 that failed at the exact same time. Afterwards
he ran an apparently undocumented (that's what he said) command: ssa_format
-l ssa# -b
Where # is obviously the SSA loop that the FWC resides on. If your sick of
seeing errors in the errpt, you can run this anytime to reset the battery
timer, just remember it really does need replacement eventually.
Regards,
Darryl
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Friday, May 30, 2003 8:18 AM
To: aix-l@Princeton.EDU
Subject: SSA Cache battery replacement
Question for all of you... How do I "reset" a F/W cache battery? I replaced
the burned out battery and it still shows the old battery statistics...i.e.
battery hours.
Any help is greatly appreciated!
Mathew Gipson
matt.gipson@americredit.com <mailto:matt.gipson@americredit.com>
817.525.7123
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:53 EDT