From: Peter McKay (Peter.McKay@INFINITY.CO.NZ)
Date: Thu May 29 2003 - 18:59:06 EDT
Hi Simon,
Thanks for your help. I had to use odmdelete -q "name=XXXX" -o CuDv
Kind Regards,
Peter McKay
Technical Consultant
Infinity Solutions
1 Show Place
Addington
P.O. Box 2640
Christchurch
New Zealand
Phone: (03) 379 9588
Fax: (03) 363 0959
DDI: (03) 963 7965 - International +64-3-963-7965
Mobile: (027) 230 1884 - International +64-2-723-01884
Help Desk: 0800 658275
Web: http://www.infinity.co.nz <http://www.infinity.co.nz/>
_____
From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
Sent: Tuesday, May 27, 2003 7:32 PM
To: aix-l@Princeton.EDU
Sounds like it.
Did you do "rmdev -d"? If you don't specify -d it leaves the
information behind. Since it's still got that, this might still work
which would be much simpler than trying to change the ODM directly.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
-----Original Message-----
From: Peter McKay [mailto:Peter.McKay@INFINITY.CO.NZ]
Sent: 25 May 2003 23:23
To: aix-l@Princeton.EDU
Subject: Re: 0514-521 and 0519-004 errors
Hi Simon,
There was a failure with one of the FC cards.
I'm picking that I'll have to remove corresponding
entries in the ODM and re-run cfgmgr.
_____
From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
Sent: Friday, May 23, 2003 8:49 PM
To: aix-l@Princeton.EDU
Have you checked the manual entry for 0514-521?
Have you deleted any devices recently, or removed any
filesets?
-----Original Message-----
From: Peter McKay
[mailto:Peter.McKay@INFINITY.CO.NZ]
Sent: 23 May 2003 06:01
To: aix-l@Princeton.EDU
Subject: 0514-521 and 0519-004 errors
Ladies and Gents,
When executing "lsdev -Cc adapter" and
"lscfg -vp" on a 7028-6C1 with a fastt200 storage array attached I get
the following output:
lsdev: 0514-521 Cannot find information
in the predefined device
configuration database for the
customized device lpfc0.
and
0519-004 libodm: The specified search
criteria is incorrectly formed.
Make sure the criteria contains only
valid descriptor names and
the search values are correct.
We are planning a AIX upgrade from 4.3.3
ML09 to 5.2 and I am sure that I want to understand this before the
upgrade.
Can anyone provide a outline to resolve
this?
The information contained in this email is privileged and confidential and
intended for the addressee only. If you are not the intended recipient, you
are asked to respect that confidentiality and not disclose, copy or make use
of its contents. If received in error you are asked to destroy this email
and contact the sender immediately. Your assistance is appreciated.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:53 EDT