From: Gipson, Mat (Mat.Gipson@AMERICREDIT.COM)
Date: Tue May 06 2003 - 09:22:46 EDT
Are you at the most recent release of microcode on your adapters, disks, and
enclosures? We had a similar situation where upgrading the microcode solved
the problem. Just an idea...
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: Tuesday, May 06, 2003 8:22 AM
To: aix-l@Princeton.EDU
Subject: SSA question
Hi *,
I have an SSA question here.
2-weeks ago I posted a question about rewiring my SSA loops here. Thanks
Simon for your response. I went ahead with the diagram and everything
works fine, from a functionality side.
I do however now get ssa errors throughout the day. SSA Link Verification
and Configuration Verification all test out OK. I have no disk errors. no
SSA adapters bad, but I get these error log entries on my systems
throughout the day. However, when the cron SSA jobs run that check
everything out, I don't get any errors.
What might be wrong ?
BV
___________________________________________
Bill Verzal
AIX Admin/Komatsu America
(847) 970-3726 (v)
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:48 EDT