From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Wed Apr 16 2003 - 11:07:29 EDT
You may need to refer to the hardware manuals to make sense of the
information.
http://www-1.ibm.com/servers/eserver/pseries/library/hardware_docs/s70.html
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
> -----Original Message-----
> From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
> Sent: 16 April 2003 16:08
> To: aix-l@Princeton.EDU
> Subject: Re: 7017 memory configuration
>
>
> lscfg -vpl mem0
>
> The location information will tell you where the memory is.
>
> BV
> ___________________________________________
> Bill Verzal
> AIX Admin/Komatsu America
> (847) 970-3726 (v)
>
>
> |---------+---------------------------->
> | | "Ruble, Rick L." |
> | | <Rick.L.Ruble@LAH|
> | | EY.ORG> |
> | | Sent by: IBM AIX |
> | | Discussion List |
> | | <aix-l@Princeton.|
> | | EDU> |
> | | |
> | | |
> | | 04/16/2003 09:54 |
> | | AM |
> | | Please respond to|
> | | IBM AIX |
> | | Discussion List |
> | | |
> |---------+---------------------------->
>
> >-------------------------------------------------------------
> ------------------------------------------------------------------|
> |
> |
> | To: aix-l@Princeton.EDU
> |
> | cc:
> |
> | Subject: 7017 memory configuration
> |
>
> >-------------------------------------------------------------
> ------------------------------------------------------------------|
>
>
>
>
> In a 7017-S70 without physically opening up the box is there a way to
> determine how the memory is configured? What quad the memory occupies?
> Thank you
>
>
> See our web page at http://www.lahey.org for a full directory of Lahey
> sites, staff, services and career opportunities.
>
> THIS MESSAGE IS INTENDED FOR THE USE OF THE PERSON TO WHOM IT
> IS ADDRESSED.
> IT MAY CONTAIN INFORMATION THAT IS PRIVILEGED, CONFIDENTIAL
> AND EXEMPT FROM
> DISCLOSURE UNDER APPLICABLE LAW. If you are not the intended
> recipient,
> your use of this message for any purpose is strictly
> prohibited. If you
> have received this communication in error, please delete the
> message and
> notify the sender so that we may correct our records.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:45 EDT