Re: Can't create volume group with 1.2TB disk

From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Fri Apr 11 2003 - 11:59:26 EDT


This is indicating a physical problem with the disk. Is this on a "Shark"?
If so, the LUN may still be formatting.

Run the command "bootinfo -s hdisk5" and see what it says.

BV
___________________________________________
Bill Verzal
AIX Admin/Komatsu America
(847) 970-3726 (v)

|---------+---------------------------->
| | Fred Yang |
| | <FYang@NSHS.EDU> |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 04/11/2003 10:40 |
| | AM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
  | |
  | To: aix-l@Princeton.EDU |
  | cc: |
  | Subject: Can't create volume group with 1.2TB disk |
>-------------------------------------------------------------------------------------------------------------------------------|

Hi, All,

We have a problem to define a VG with one 1.2TB hdisk which was built by
hardware RAID5 with 9 disks (shown as hdisk5 in AIX). I used command "mkvg
-s 1024 -t 2 -y testvg hdisk5" to create the testvg, so it should be
possible to define a Physical Volume with 1024*2*1016MB = 2.xTB.

But we get the following error message:

0516-024 mkvg: Unable to open physical volume.
        Either PV was not configured or could not be opened. Run
        diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-1254 mkvg: Changing the PVID in the ODM.
Method error (/etc/methods/chgdisk):
        0514-047 Cannot access a device.

0516-024 mkvg: Unable to open physical volume.
        Either PV was not configured or could not be opened. Run
        diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-304 mkvg: Unable to find device id in the Device
        Configuration Database.
0516-324 mkvg: Unable to find PV identifier for physical volume.
        The Device Configuration Database is inconsistent for physical
        volumes.

Any idea why this happens? We are using AIX5.1 .

Regards,
Fred Yang
NSLIJ Information Service
perotsystems



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:44 EDT