mkcd -L -d /dev/cd0 error

From: Patrick B. O'Brien (pobrien@DOIT.NV.GOV)
Date: Mon Apr 07 2003 - 19:44:37 EDT

Next message: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Previous message: Jan-Frode Myklebust: "GPFS problems"
Next in thread: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Reply: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Patrick B. O'Brien: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Patrick B. O'Brien: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Librado Pamintuan: "Re: mkcd -L -d /dev/cd0 error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

The following device;
cd0 Available 10-60-00-2,0 SCSI DVD-RAM Drive

is providing the error below.

# mkcd -L -d /dev/cd0
Initializing mkcd log: /var/adm/ras/mkcd.log...
Verifying command parameters...
0512-303 mkcd: Device /dev/cd0 is not ready.

I have the
freeware.cdrecord.rte 1.9.0.0 C CD-Recorder burner controller
freeware.cdrtools.rte 1.10.0.0 C freeware.cdrtools.rte CD & DVD

filesets and links put into place. This cdrom will read no problem. The archive does not seem to hit on the above error.
I have rebooted this 6H1. Any help please, TIA.

Next message: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Previous message: Jan-Frode Myklebust: "GPFS problems"
Next in thread: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Reply: Lloyd Dieter: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Patrick B. O'Brien: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Patrick B. O'Brien: "Re: mkcd -L -d /dev/cd0 error"
Maybe reply: Librado Pamintuan: "Re: mkcd -L -d /dev/cd0 error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:43 EDT