From: Patrick B. O'Brien (pobrien@DOIT.NV.GOV)
Date: Tue Mar 11 2003 - 11:51:25 EST
Make sure your /etc/hosts file is updated correctly. Take a look at your netstat -r making sure the route table is good. Check speed and duplex ECT with lsattr -El en0 or smit chgenet.
-----Original Message-----
From: Tim Muller [mailto:aix_sa_706@YAHOO.COM]
Sent: Tuesday, March 11, 2003 8:36 AM
To: aix-l@Princeton.EDU
Subject: Replacing NICs
I have two servers that use FIDI network adapters. I
have ethernet adapters with which to replace them.
After physically replacing the adapters, I will run
cfgmgr and I will, using SMIT, go into the TCP/IP
configuration menus and change fi0 to en0 wherever it
occurs. What else might I need to adjust? TIA.
=====
Tim Mueller
Hamilton Co. Dept. of Job & Family Services
Cincinnati, OH USA
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:38 EDT