From: VINCENT D'ANTONIO D'ANTONIO (dantoniov@COMCAST.NET)
Date: Sun Mar 02 2003 - 02:21:26 EST
good morning all, I have a customer running ADSM 4.2.1 doing a recovery
test and they can't get the library to work. Through smit I see that
the devices/adsm were not discovered, these are the /dev/mt devices
which are FC drives. the customer has the drives configured as /dev/rmt
devices. also I dont see where I can create the library manager my two
choices are SCSI or FC the manager is ethernet on the 3494 library in
our setup. I think it is a software config issue but not sure where or
what to do.
I cant get any screen shots to show but I can run commands and I will
type out the results if anything is needed.
thanks
Vince
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:37 EDT