From: jim kastner (jim.kastner@NWSCO.COM)
Date: Tue Feb 25 2003 - 12:12:44 EST
How do you verify that microcode and firmware are up to date?
I just upgraded to ML10 and need to install a patch APAR IY36411 to kill
some zombies, which is included in ML11. It is our policy to wait a
month or so to update. I don't know if this helps...
Thanks,
Jim Kastner
Systems Administrator
National Welders Supply Co., Inc.
-----Original Message-----
From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
Sent: Tuesday, February 25, 2003 11:30 AM
To: aix-l@Princeton.EDU
Subject: Re: AIX 4.3 ML10 questions
If you already have a plan for migration to AIX5L this year, I'd be very
tempted not to bother with 4.3.3 maintenance. If you have any time to
spare, check that your microcode and firmware levels are all up to date;
that's more likely to remain relevant.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Dave.Zarnoch@SUNGARD.COM [mailto:Dave.Zarnoch@SUNGARD.COM]
> Sent: 25 February 2003 16:10
> To: aix-l@Princeton.EDU
> Subject: AIX 4.3 ML10 questions
>
>
> Folks,
>
> I have just been informed that ML11 is now available for AIX4.3
>
> We install the previous ML when a new one is published.
>
> Since AIX 4.3 is reaching "end of life", are there any advantages in
> installing ML10?
>
> I'd appreciate any advice, thoughts or experiences...
>
> Thanks!
>
> Dave Zarnoch
> SunGard Resources Group
> SunGard eSourcing
> Voorhees, NJ
> Dave.Zarnoch@sungard.com
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:36 EDT