From: Smith, Todd (Todd.Smith@CAMC.ORG)
Date: Mon Feb 24 2003 - 23:43:37 EST
Hello Jeff,
I don't have 1) 2) or 3) running in my shop, however my understanding is
that you need iSCSI adapters to make it work. A normal NIC isn't going to
do the job since a iSCSI adapter offloads the TCP overhead like a SSL
accelerator does.
Todd Smith
-----Original Message-----
From: Jeff Barratt
To: aix-l@Princeton.EDU
Sent: 2/24/2003 10:13 PM
Subject: SAN question/iSCSi -offtopic?
hopefully, this not too off-topic. I ask this because mostly AIX guys
own
the sharks and fabrics in their environments.
I was in an IBM/cisco kickoff meeting today, the main focus was the
cisco
SAN switches/director. however, iSCSI came up because that seems to be
Cisco's big advantage in this arena.
my questions:
1. Is anyone using iSCSI under AIX or M$? according to the cisco media
hype, AIX is supported
2. is anyone out there presenting LUNs from a 2105 to a cisco 5420/5428
storage router ?
3. if you answered yes to the previous 2 questions..Is anyone mirroring
LVs
(or disk in M$ world) across both fibre channel and IP? I ask because it
makes a lot of sense in the Microsoft world. I could cut my connection
cost
in half If I only needed 1 HBA in the host and for failover I used the
10/100/1Gb NIC. I am uncertain how load balancing/sharing would work via
SDD, but I assume I could tweak it so that only the FC HBA would be
taking
disk requests until /if there was a failure and I could then offload
traffic
via iSCSI.
any info on your experiences would be greatly appreciated.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:36 EDT