From: Echave Javier (Javier.Echave@KUONI.CH)
Date: Wed Feb 19 2003 - 10:57:06 EST
Did you check the SAN Zoning?
You can verify the attachement with
lsattr -El fscsi1 (for adapter fcs1)
if attach is shown as "switch" then you are in the SAN connected otherwise
you will see the value "al".
with kind regards, mit freundlichen Grüssen
Javier Echave
Dipl. Wirtschaftsinformatiker
Information Technology Division
Head of System Engineering
Kuoni Travel Ltd.
Neue Hard 7
CH-8010 Zurich, Switzerland
Tel.+41 1 277 40 26
Mobile +41 79 249 67 66
Fax +41 1 277 52 69
mailto:javier.echave@kuoni.ch
http://www.kuoni.ch
An IT of Difference
-----Original Message-----
From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
Sent: 19. Februar 2003 16:43
To: aix-l@Princeton.EDU
Subject: Re: Cannot cfgmgr on a new FC
Is fcs0 working, and is it the same adapter type as fcs1?
Just wondering if you have all the correct filesets loaded.
Kevin Adams
-----Original Message-----
From: Calderon, Linda [mailto:CalderonL@GOALAMO.COM]
Sent: Wednesday, February 19, 2003 7:12 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] Cannot cfgmgr on a new FC
I am trying to connect a new HBA on a P660 to a switch for a SAN. This HBA
has not been used previously, newly cabled etc. I issued the following
commands and receive the following errors:
* rmdev -Rdl fsc1
0514-519 The following device was not found in the customized device
configuration database: name 'fcs1'
* cfgmgr
0514-061 Cannot find a child device
Looking for ideas as to root cause.
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:36 EDT