From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Wed Feb 05 2003 - 19:45:35 EST
I would think just using smitty tty, change/show tty settings and make them
look the same?
lsdev -Cc tty
ps -ef|grep getty
Kevin Adams
-----Original Message-----
From: Bradberry, Kenneth [mailto:KBradberry@SUPERIORCONSULTANT.COM]
Sent: Wednesday, February 05, 2003 1:51 PM
To: aix-l@Princeton.EDU
Subject: [aix-l] Alternate console
I want to setup SA2 as a second console, SA1 already has a 3153 hanging off
of it. I want SA2 to act as a remote console via an Avocent CPS. I have
tested the CPS on SA1 and it picks up the console with no problem, is there
a way to get SA2 to react the same way. I have it setup the same as SA1
with a getty enabled.
Thanks,
Ken.
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:34 EDT