From: Damir Delija (damir.delija@PBZ.HR)
Date: Thu Jan 30 2003 - 02:33:17 EST
Hi!
We have some stragne situations too, but
one problem in dlapar was caused by faluty ethernet cable (DLPARs depeneds
very much on network communication)
and other was suddenly resolved after machine reboot full power down ..
(like PC I'm affraid)
I suggest to do power down on the whole machine and than try again
I hope this helps.
Damir Delija
> -----Original Message-----
> From: Kilchenmann Timo [mailto:timo.kilchenmann@BECHTLE.CH]
> Sent: Wednesday, January 29, 2003 4:56 PM
> To: aix-l@Princeton.EDU
> Subject: DLPAR Problem on regatta
>
>
> We have a p670 system. HMC, p670 and AIX (5.2) should be
> ready for DLPAR.
>
> When I try to remove a resource from a AIX 5.2 partition by
> HMC graphical
> interface I always get the error "HMCERRV3DLPAR004" in the
> progress window.
>
> I couldn't find any documentation about the error message/code.
>
> Any idea?
> --------------------------------------------------------
> Timo Kilchenmann E-Mail timo.kilchenmann@bechtle.ch
> Phone +41 1 843 34 91 (direct)
> Bechtle Data AG or +41 1 843 32 32
> Bahnstrasse 58/60 Telefax +41 1 843 34 24
> CH-8105 Regensdorf Mobile +41 79 417 43 55
> Switzerland http://www.bechtle-data.ch
> --------------------------------------------------------
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:32 EDT