From: Bruce Harvey (BruceH@ROUTESCAPE.COM)
Date: Wed Jan 29 2003 - 13:13:12 EST
Rather than sending this person down another road that may be prone to error
and setup/config problems, if their AIX system has a compiler, the very
first search on the web I performed ended up with this site:
ftp://garbo.uwasa.fi/unix/zmodem/rzsz3_36.zip
ftp://garbo.uwasa.fi/unix/zmodem/rzszmake.txt
Not too many others carry it any more. You'll need to compile it on the AIX
box, but it should work fine after that.
If you also need to install a compiler (GNU gcc compiler, for example), you
may consider going the FTP route after all ... level of effort getting
everything right on either side is about the same, and you don't change the
AIX system as much.
Good luck.
----------------------------------
Bruce T. Harvey (Special Projects)
----------------------------------------
bth@comcast.net -- bruceh@routescape.com
410-236-5721 (cell) -- 410-403-2390 (off.)
-------------------------------------------
Insight Distribution Systems / CoAxis, Inc.
Hunt Valley, Maryland U.S.A. 21031-1422
-------------------------------------------
-----Original Message-----
From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
Sent: Wednesday, January 29, 2003 1:01 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] send/receive files using dial-up modem
You might consider setting up a PPP server on the AIX box, then you could
use FTP.
Kevin Adams
-----Original Message-----
From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
Sent: Wednesday, January 29, 2003 9:50 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] send/receive files using dial-up modem
Sorry I forgot to mention that I'm not
sending/receiving between 2 AIX but rather
from a PC and an AIX server.
JOe
-----Original Message-----
From: Baker, Sanchia [mailto:Sanchia.B.Baker@ACCENTURE.COM]
Sent: Wednesday, January 29, 2003 9:22 AM
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
try looking up uucp & uuto commands. The files you want to send may need to
be uuencoded ( converts bin to ascii or vice versa). See man for details
HTH
Sanchia
-----Original Message-----
From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
Sent: 29 January 2003 17:16
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
I know I can't use FTP since this is not
a TCP/IP connection but simple dial-up.
Is there a shareware zmodem protocol
to send/receive files from AIX 4.3.2?
TIA
Joe
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:32 EDT