From: Taylor, David (DTaylor@WBMI.COM)
Date: Tue Jan 21 2003 - 10:30:26 EST
Tim,
Here's a link to my post regarding this issue:
http://marc.theaimsgroup.com/?l=aix-l&m=102624002207315&w=2
David
-----Original Message-----
From: tim@SEVIGNY.DEMON.CO.UK
[mailto:tim@SEVIGNY.DEMON.CO.UK]
Sent: Tuesday, January 21, 2003 9:07 AM
To: aix-l@Princeton.EDU
Subject: Filesystem Problem
People,
Couple of collegues of mine are trying to transfer some data
from an old server to a new server. The data in question is small map image
tiles. They have a 48gb flesystem with these files in it on the old
system.
The filesystem backs up ok but halfway through the restore
on the new system the restore fails with a message about being unable to
write to the current file to disk. A df at this point shows that the
filesystem they are restoring into has lots of space left in it (>20gb) and
plenty of inodes left. If they then try to create a file in that filesystem
from the command line (e.g. yes > yes.out) its size max's out at 32kb.
The old server is running AIX 4.2.1 whilst the new server is
running AIX 4.3.3 ML10. Files are transported via tape using
backup/restore.
Any ideas?
Tim
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:30 EDT