From: Green, Simon (SGreen@KRAFTEUROPE.COM)
Date: Wed Jan 15 2003 - 12:44:48 EST
Provided the empty slot was included in the LPAR, just run cfgmgr. If
you're at 5.2 you can add the slot to the LPAR dynamically.
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l
<http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2> &r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
<http://www.faqs.org/faqs/aix-faq/>
N.B. Unsolicited email from vendors will seldom be appreciated.
-----Original Message-----
From: Sheets, Jerald [mailto:JSHeets@OLOLRMC.COM]
Sent: 15 January 2003 17:18
To: aix-l@Princeton.EDU
Subject: Re: hot swap p670 pci-card
Once the card is in, is it immediately available to an LPAR? IOW, do you
cfgmgr on the lpar, and it picks it up, or do you allocate the hardware to
the LPAR and cfgmgr, or do you have to bounce an LPAR to make the hardware
available to it?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:28 EDT