Re: Question: can one use an Adaptec 2940 SCSI controller in either H50 or H70?

From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Thu Jan 09 2003 - 09:41:22 EST


You would need an IBM 6204 (Diff) or 6206 (SE) adapter. I would not use
the 2940. You'd be hard pressed to find the drivers.

BV
--------------------------------------------------------------------------------------------------------

Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B

                    Ken_Sedlacek@K
                    YRUS.COM To: aix-l@Princeton.EDU
                    Sent by: "IBM cc:
                    AIX Discussion Subject: Question: can one use an Adaptec 2940 SCSI controller in
                    List" either H50 or H70?
                    <aix-l@Princet
                    on.EDU>

                    01/09/2003
                    08:39 AM
                    Please respond
                    to "IBM AIX
                    Discussion
                    List"

I feel stupid in asking this question, but we are in need of some more
storage in our H50s/70s.

Has anyone done this before??

Good or bad results??

Opinions please!

Thank you.

Ken Sedlacek
AIX/TSM/UNIX Administrator
ksedlacek@kyrus.com

IBM Certified Specialist: RS/6000 AIX v4.3 Support
IBM Certified Specialist: RS/6000 SP & PSSP 3
Tivoli Certified Consultant - Tivoli Storage Manager v4.1

**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:27 EDT