From: Mills, John T (John.T.Mills@ERAC.COM)
Date: Mon Jan 06 2003 - 14:52:10 EST
Chris,
My daemon starts on demand, so I don't have anything to restart
I think. I tried the change and it is still disallowing login with
rlogin=false. Was this a fix for ssh to honor rlogin or ignore it?
I am trying to get ssh to ignore rlogin=false.
John
-----Original Message-----
From: Chris Gregors [mailto:Chris.Gregors@TELUS.COM]
Sent: Monday, January 06, 2003 1:08 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] ssh when rlogin=false
In /etc/sshd_config set the following entry:
UseLogin yes
And restart sshd. This should cause it to honor rlogin=false.
Chris Gregors
Telus Enterprise Solutions
Email: chris.gregors@telus.com
Phone: (780) 493-2450
Cell: (780) 718-5917
-----Original Message-----
From: Mills, John T [mailto:John.T.Mills@ERAC.COM]
Sent: Monday, January 06, 2003 10:33 AM
To: aix-l@Princeton.EDU
Subject: Re: ssh when rlogin=false
Bill,
I don't have an sshd running. I'm using openssh,
and it starts a sshd when I connect but it doesn't
keep one running in the background. I am just doing
and 'ssh hostname' to test and a 'chuser rlogin=false
uid' to make the change.
When I set rlogin=false I get the standard:
Remote logins are not allowed for this account.
message. With rlogin=true I can ssh with no problems.
John T. Mills
-----Original Message-----
From: Bill Verzal [mailto:Bill_Verzal@BCBSIL.COM]
Sent: Monday, January 06, 2003 11:03 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] ssh when rlogin=false
Curious - did you refresh or stop/start sshd ?
----------------------------------------------------------------------------
----------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
"Mills, John
T" To: aix-l@Princeton.EDU
<John.T.Mills@ cc:
ERAC.COM> Subject: ssh when rlogin=false
Sent by: "IBM
AIX Discussion
List"
<aix-l@Princet
on.EDU>
01/06/2003
11:00 AM
Please respond
to "IBM AIX
Discussion
List"
All,
Has anyone had any luck getting ssh to function
when rlogin=false has been set? I understand that
ssh takes rlogin=false very seriously, but I am
trying to configure ssh to function after this
change is made.
Thanks,
John T. Mills
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of the
addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at
(312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New
Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:26 EDT