From: Jolet, John (John.Jolet@MISYSHEALTHCARE.COM)
Date: Wed Nov 27 2002 - 15:40:42 EST
yeah, sounds like name resolution all right.
-----Original Message-----
From: Naylor, Jim [mailto:Jnaylor@SCHNUCKS.COM]
Sent: Wednesday, November 27, 2002 2:14 PM
To: aix-l@Princeton.EDU
Subject: Re: rsh-rlogin
John,
I just tried this and it worked but it takes about 3-4 mins to connect. We
are now putting a sniffer on to see why. Thanks for the direction.
-----Original Message-----
From: Jolet, John [mailto:John.Jolet@MISYSHEALTHCARE.COM]
Sent: Wednesday, November 27, 2002 1:31 PM
To: aix-l@princeton.edu
Subject: Re: rsh-rlogin
is the entry in the .rhosts file fully qualified for domain and subdomain
names?
-----Original Message-----
From: Naylor, Jim [mailto:Jnaylor@SCHNUCKS.COM]
Sent: Wednesday, November 27, 2002 1:19 PM
To: aix-l@Princeton.EDU
Subject: rsh-rlogin
Admins,
I am trying to do a rlogin or rsh from an AIX 4.3.3 F40 to an AIX 3.2.5 220
and it keeps asking me for a password. I have the same user set up on both
systems. Each user has a .rhosts file with 600 permisions and is owned by
that user. Each system has an entry in the /etc/hosts file for the opposite
system. /etc/netsvc.conf is setup for hosts=local,bind the resolv.conf has
the correct entries for the DNS servers. I can do an rsh from the 3.2.5
system to the 4.3.3 system without any problems but cannot rsh from the
4.3.3 system to the 3.2.5 systems. I can also rsh from the 3.2.5 system to
an HP-UX system but cannot go the opposite direction. I have read all the
entries in the archives and they all refer to the above mentioned files. I
have tried everything I can think of. Any other ideas would be greatly
appreciated.
Thanks,
Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
* Direct: (314) 994-4784
*)) Cell: (314) 691-0186
* Fax : (314) 994-4684
* jnaylor@schnucks.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:23 EDT