From: Green, Simon (SGreen@KRAFTEUROPE.COM)
Date: Tue Nov 19 2002 - 11:02:07 EST
What serial number do you want, then? That command gives the unique SSA
serial number and I can't honestly think of anything else that's terribly
useful.
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> Sent: 19 November 2002 15:55
>
>
> No this command doesn't give the required serial number...
>
> -----Original Message-----
> From: Green, Simon [mailto:SGreen@KRAFTEUROPE.COM]
> Sent: Tuesday, November 19, 2002 10:40 AM
>
> To show the 8-digit SSA Serial number - that's the one
> printed on the front
> of the disk - I use "lsattr -El hdiskX -a connwhere_shad|cut -c20-27".
> It'll work with pdisk as well.
>
> > -----Original Message-----
> > From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> > Sent: 19 November 2002 15:34
> > To: aix-l@Princeton.EDU
> > Subject: disk serial number
> >
> >
> > Hi!
> >
> > I have a bad disk on the ssa sub system and
> > have to replace
> > it. I wanted to know how to find the right disk to replace. The list
> > configuration command does not show the correct serial
> > number. Is there any
> > other way. I know the diag would show it. But I need to know
> > if there is any
> > other commands that can be used.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:21 EDT