From: Dave.Zarnoch@SUNGARD.COM
Date: Wed Nov 13 2002 - 09:22:59 EST
Sorry...
I wanted to see if anyone had the list for AIX 5.1L not 5.2
Thanks!
Bill Verzal
<Bill_Verzal@BCBS To: aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Re: AIX 5.2 doesn't support "old" machines?
Discussion List
<aix-l@Princeton.
EDU>
11/13/2002 08:51
AM
Please respond to
IBM AIX
Discussion List
(See attached file: MCA-PREP-SoD.pdf)
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
Dave.Zarnoch@S
UNGARD.COM To: aix-l@Princeton.EDU
Sent by: "IBM cc:
AIX Discussion Subject: Re: AIX 5.2 doesn't
support "old" machines?
List"
<aix-l@Princet
on.EDU>
11/13/2002
07:22 AM
Please respond
to "IBM AIX
Discussion
List"
Does anyone have the list of hardware that AIX5l doesn't support?
Thanks!
Dave Zarnoch
UNIX Systems Engineer
SunGard eSourcing
600 Laurel Oak Rd.
Voorhees, NJ 08043
Dave.Zarnoch@sungard.com
"Green, Simon"
<SGreen@KRAFTEURO To:
aix-l@Princeton.EDU
PE.COM> cc:
Sent by: IBM AIX Subject: Re: AIX 5.2
doesn't support "old" machines?
Discussion List
<aix-l@Princeton.
EDU>
11/13/2002 06:17
AM
Please respond to
IBM AIX
Discussion List
It's been discussed on here in the past.
I've been aware that it was going to happen for a few years. i.e. Some
unspecified AIX5l release would not support older machines, although I'd
only heard specific mention of MCA hardware.
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Rick Kissel [mailto:RKissel@RATIONAL.COM]
> Sent: 12 November 2002 18:26
> To: aix-l@Princeton.EDU
> Subject: AIX 5.2 doesn't support "old" machines?
>
>
> We just started installing AIX 5.2 on our machines and found
> that "old"
> (i.e. non-chrp) hardware is no longer supported (this is documented in
> the release notes, but I don't remember hearing about it before the
> release). These are machines like 43p Model 140 (7043-140) that we
> bought less than 2 years ago. IBM says we're the only
> customer who has
> complained about this, but I find that hard to believe. I wonder if
> anyone else has found this to be a problem, found a
> work-around, and/or
> complained to IBM?
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of
the addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at
(312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New
Mexico.
**********
(See attached file: MCA-PREP-SoD.pdf)
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:20 EDT