From: John F Riordan (jriorda2@CSC.COM)
Date: Fri Oct 25 2002 - 11:14:55 EDT
Hello all,
Was checking to see if any of you have an idea why I am getting an error
when running "xmperf" on a F-80 running AIX 5.1 ML-03... Xmperf version
3.0
When I start xmperf and open just the default combo monitor the Memory
section of the monitor (paging and real mem) slowly disappears and then I
receive the following in the "xmperf" console window:
Spmi Error code = 197 (f)
Spmi Error code = 197 (f)
etc..
I am running xmperf on Three H-50's Running AIX 4.3.3, Two B80's and AIX
5.1/4.3.2, One 6H1 and AIX 5.1, and a H80 running 4.3.3. And I don't have
the same problem.
Any Thoughts?
As always, thanks in advance.
John
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:17 EDT