From: Klaus Oberle (Klaus.Oberle@LINDE-MH.DE)
Date: Wed Oct 23 2002 - 07:32:36 EDT
Hi Barry
try this:
# rsh your_host 'command_to_run \"param1\" \"param2\" '
/klaus
---------------------------------------------------
Klaus Oberle
IT Administration
Linde Material Handling
Aschaffenburg / Germany
klaus.oberle@linde-mh.de
www.linde.com
---------------------------------------------------
Barry Deevey
<Barry.Deevey@SE An: aix-l@Princeton.EDU
FAS.CO.UK> Kopie:
Gesendet von: Thema: rsh question
IBM AIX
Discussion List
<aix-l@Princeton
.EDU>
23.10.2002 13:16
Bitte antworten
an IBM AIX
Discussion List
Hi all,
I'm trying to run a rsh command, and I need to pass 2 parameters in double
quotes on the remote machine, i.e. I require the remote command to be
# command_to_run "param1" "param2"
But I cannot seem to be able to pass the double quotes over to the remote
machine.
Many thanks for any replies they are much appreciated.
Best Regards
Barry
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail
in error) please notify the sender immediately and destroy this e-mail.
Any unauthorised copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Linde Material Handling.
Since January 2002 we use the e-mail domain linde-mh.de instead
of linde-fh.de.
This mail has been swept for the presence of computerviruses.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:16 EDT