Re: [Q] how to disable and enable network interface?

From: Ferenc Gyurcsan (fgyurcsa@AVAILANT.COM)
Date: Tue Oct 08 2002 - 11:07:36 EDT

• Next message: Mark Gosselin: "Install OS on a 610"
• Previous message: L: "[Q] how to disable and enable network interface?"
• Maybe in reply to: L: "[Q] how to disable and enable network interface?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

smit tcpip
further configuration
network interfaces
network interface selection
change/show
Current STATE :up/down/detach

Try this, this will prevent it from coming back online when you reboot the
node (as opposed to ifconfig down). If you don't get tr0 in the list, let me
know and I can look it up on an ATM machine what the exact path is for lane.

--Ferenc

-----Original Message-----
From: L [mailto:leed@CHELE.CAIS.NET]
Sent: Tuesday, October 08, 2002 10:35 AM
To: aix-l@Princeton.EDU
Subject: [Q] how to disable and enable network interface?

We have ATM card (at0 emulate as token Ring tr0) on IBM RS/6000. We
going to install 100Mbit Ethernet card on it and replace the ATM card.
Before we fullly test the Ethernet, we want both card co-exist on the same
server (different IP addresses). Can anone tell me how can I disable the
tr0 interface and enable it if need. If I disable tr0 and reboot server
will tr0 still come back? some way to avoid that?

Thanks.

• Next message: Mark Gosselin: "Install OS on a 610"
• Previous message: L: "[Q] how to disable and enable network interface?"
• Maybe in reply to: L: "[Q] how to disable and enable network interface?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:15 EDT