From: terry.german@PHONES4U.CO.UK
Date: Wed Sep 18 2002 - 04:29:45 EDT
John,
All you need to is change the IP address entry within /etc/hosts for that
print server, /etc/config doesn't hold IP addresses.
Thanks
-----Original Message-----
From: John Dunn [mailto:john.dunn@SEFAS.CO.UK]
Sent: 18 September 2002 09:27
To: aix-l@Princeton.EDU
Subject: Changeing IP addresses in /etc/qconfig
We are changeing the IP addresses of our remote print servers.
As our print queue set up explicitly references IP addresses rather than
hostnames, can I simply change the IP addresses in /etc/qconfig? Ot do I
need to delete and recreate the print queues. I am a bit concerned that the
device value does not seem to contain the whole IP address
e.g
printer1:
device = @147
up = TRUE
host = 147.122.123.23
s_statfilter = /usr/lib/lpd/bsdshort
l_statfilter = /user/lib/lpd/bsdlong
rq = pr234
@147:
backend = /user/lib/lpd/rembak
There are similar entries for the other printers
John
*************************************************************
This email, and any attachment, is confidential. If you have
received it in error, please delete it from your system.
Do not use or disclose the information in any way, and notify
the sender immediately.
The contents of this message may contain personal views which
are not the views of Phones4U Ltd or any other company within
the Caudwell Group, unless specifically stated.
You may not disclose any information contained herein unless
disclosure is specifically allowed or the information is
publicly available.
*************************************************************
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:12 EDT