From: John Dunn (john.dunn@SEFAS.CO.UK)
Date: Wed Sep 04 2002 - 08:46:27 EDT
I've set
Msmit*fontList: 1
in my xdefaults.
This changes the font, but not the size of the msmit screen, which still
disappears off the top of the window
John
> -----Original Message-----
> From: Green, Simon [SMTP:SGreen@KRAFTEUROPE.COM]
> Sent: 04 September 2002 12:07
> To: aix-l@Princeton.EDU
> Subject: Re: KEA!X
>
> I use Exceed, and specify the font-size in the "dtterm" command
> which I invoke, (-fn flag). This doesn't change the number of
> lines displayed, though: it just makes the whole window bigger
> or smaller.
>
> Simon Green
> Philip Morris ITSC Europe
>
> AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
> AIX FAQ at http://www.faqs.org/faqs/aix-faq/
>
> N.B. Unsolicited email from vendors will seldom be appreciated.
>
> > -----Original Message-----
> > From: John Dunn [mailto:john.dunn@SEFAS.CO.UK]
> > Sent: 04 September 2002 11:56
> > To: aix-l@Princeton.EDU
> > Subject: Re: KEA!X
> >
> >
> > Thanks Simon, but the top of the smit screen still appears
> > off the screen,
> > and as I said it works fine with Exceed.
> >
> > If I change the CDE font size and then run msmit from a
> > dtterm session, it's
> > OK, but I want this to work automatically when the user logs into CDE.
> >
> > Can I set the font size in .dtprofile?
> >
> > > -----Original Message-----
> > > From: Green, Simon [SMTP:SGreen@KRAFTEUROPE.COM]
> > > Sent: 04 September 2002 11:30
> > > To: aix-l@Princeton.EDU
> > > Subject: Re: KEA!X
> > >
> > > What's the value of $TERM? If nothing else, "export
> > > TERM=vt100" usually gives you something that works.
> > >
> > > > -----Original Message-----
> > > > From: John Dunn [mailto:john.dunn@sefas.co.uk]
> > > > Sent: 04 September 2002 10:54
> > > > To: aix-l@Princeton.EDU
> > > > Subject: KEA!X
> > > >
> > > >
> > > > I use both Exceed and KEA!X as X windows emulations.
> > > >
> > > > My .dtprofile starts msmit.
> > > >
> > > > With Exceed the SMIT screen fits OK into the screen, but with
> > > > KEA!X the top
> > > > of the SMIT screen is off the top of the screen.
> > > >
> > > > Anyone know how to configure KEA!X so this does not happen?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:11 EDT