Re: hardware needed to install HACMP?

From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Fri Aug 30 2002 - 09:12:52 EDT


I've used old 9076 SP internal disks with ribbon cables externally. Not
the neatest looking thing, but it works.

BV
--------------------------------------------------------------------------------------------------------

Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
MailStop: 27.201C

                    Bill Zhang
                    <aicc_us@YAHOO To: aix-l@Princeton.EDU
                    .COM> cc:
                    Sent by: IBM Subject: Re: hardware needed to install HACMP?
                    AIX Discussion
                    List
                    <aix-l@Princet
                    on.EDU>

                    08/29/2002
                    09:33 PM
                    Please respond
                    to IBM AIX
                    Discussion
                    List

Bill,

I was laughing at myself trying to connect
43p,disk,43p using a two device ribbon cable.
obviously it won't work.
So, a three way cable is the one I need.
I can even use a internal(68-pin) disk as a external
disk?

Bill
--- Bill Verzal <Bill_Verzal@BCBSIL.COM> wrote:
> You'd be better served to create a SCSI twintail.
>
> 43p ----- disk ---- 43p
>
> BV
>
--------------------------------------------------------------------------------------------------------

>
> Bill Verzal
> Technical Consultant
> Forbes Technical Consulting
> (312) 653-3684
> bill_verzal@bcbsil.com
> MailStop: 27.201C
>
>
>
> Bill Zhang
> <aicc_us@YAHOO To:
> aix-l@Princeton.EDU
> .COM> cc:
> Sent by: IBM Subject:
> hardware needed to install HACMP?
> AIX Discussion
> List
> <aix-l@Princet
> on.EDU>
>
>
> 08/29/2002
> 10:04 AM
> Please respond
> to IBM AIX
> Discussion
> List
>
>
>
>
>
>
> Hi All,
> I'm trying to install HACMP in my lab.
> I want to include two nodes(43p) in this cluster. I
> have two ethernet cards on each nodes. I need a SCSI
> disk for the two computer to share.
>
> My question is:
> Can I use any 68-pin scsi disk and connect this disk
> to the nodes with a Y cable?
>
> Are these all I need?
>
> TIA
>
> Bill
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:10 EDT