From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Thu Aug 22 2002 - 16:11:42 EDT
Check the file allocation on Mainframe, such as lrecl, blksize and so on.
Kevin
-----Original Message-----
From: leed@CHELE.CAIS.NET [mailto:leed@CHELE.CAIS.NET]
Sent: Thursday, August 22, 2002 1:03 PM
To: aix-l@Princeton.EDU
Subject: [aix-l] FTP file transfer from RS/6000 to mainffame?
we transfer file (ASCII file) from RS/6000 to IBM Mainframe use "ftp". I
got message "data has truncated". Does anyone know why?
ftp XXXX
ID
Password
ftp>send
(local_file) file1
(remote-file) 'file001'
200 port request OK.
125 storing data set file001
250 Transfer completed (data was truncated)
106722429 bytes sent in 94.42 seconds (1104 Kbytes/s)
local: file1 remote: 'file001'
ftp>
Thanks
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:10 EDT