From: Stamper, Steve (sstamper@FOREMOST.COM)
Date: Wed May 12 2004 - 08:07:57 EDT
I've also noticed that near the end of a normal CDROM type install, some
RPMs are loaded, then some final install work is done. Maybe I should be
asking if anyone knows where/how THIS order is determined? It might give me
a clue where to start looking.
Thanks - Steve
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Mills, John T (9814)
Sent: Tuesday, May 11, 2004 3:12 PM
To: aix-l@Princeton.EDU
Subject: Re: NIM Install order question
You can specify them in a bundle as part of the base installation. They
must be included
in your installation lppsource though. There is only a small opportunity to
do installations
on the first pass. I've decided to use multiple install passes simply
because administration
of the lppsources was a greater priority.
John T. Mills
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Stamper, Steve
Sent: Tuesday, May 11, 2004 11:45 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] NIM Install order question
I am figuring out some of the finer points of NIM installations. I am
wanting to install openssh & openssl on the initial installation pass,
however the openssl RPM must be installed before the openssh. I would
rather not throw them into the afterboot script.
I have started looking around for something that tells me NOW the order of
installation is done. Can someone point me to some documentation or give me
a clue.
Thanks - Steve
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:54 EDT