From: Clifton, Pablo (Pablo.Clifton@BCBSFL.COM)
Date: Fri Apr 23 2004 - 11:36:59 EDT
Stewart-
Look for information on "etherchannel".
Does your server have the smit panel:
smitty etherchannel
Note- there may be some config work to do on your ethernet switch as well- sometimes to etherchannel the network cables must reside in consecutive ports on the network switch.
I've connected 2Gbit ethernet cables as 1 and it worked, but never tried 4.
--- Pablo Clifton UNIX Tech Support > -----Mensaje original----- > De: Jorgenson, Stewart [mailto:sjorgenson@MONEYGRAM.COM] > Enviado el: Friday, April 23, 2004 11:56 AM > Para: aix-l@Princeton.EDU > Asunto: TCPIP question... > > > Is it possible to have multiple (4) Ethernet adapters to appear as one > address? Is there a name for it? > I am not aware of it, and someone is asking me to do it... > > Thanks! > > Stewart Jorgenson > Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc. The information contained in this document may be confidential and intended solely for the use of the individual or entity to whom it is addressed. This document may contain material that is privileged or protected from disclosure under applicable law. If you are not the intended recipient or the individual responsible for delivering to the intended recipient, please (1) be advised that any use, dissemination, forwarding, or copying of this document IS STRICTLY PROHIBITED; and (2) notify sender immediately by telephone and destroy the document. THANK YOU.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:51 EDT