From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Tue Apr 20 2004 - 14:27:23 EDT
Run rpcinfo -p and you can see what you are using.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX CATE
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of Edson
Noboru Yamada
Sent: Tuesday, April 20, 2004 11:19 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] NFS through firewall
Hi,
I need to make a NFS server (under AIX) run behind a firewall. Which ports
should I open?
I know that some ports are fixed (nfsd always listen the 2049 tcp/udp port),
but mountd, for
instance, binds to a random port and tells portmap about that.
Is there a way to fix these ports? If not, is there at least a known range
on which these processes listens to?
Thank you
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:50 EDT